·
Alarms
What
to do if the dew point gets too high.
·
Module
Reception (among other things you can find testing statistics and
procedures there).
·
Safety
o
General
Safety issues
·
Oxford
University Medical Emergency Procedures.
·
Handling of Beryllium
Oxide (BeO).
o
Oxygen
depletion hazard (ODH) monitor.
o
Cold
Room related safety:
o
Safety
notes for the Desiccator.
o
Safety
notes for the chillers..
o
Barrel
cooling system related safety
o
Barrel
cooling system risk assessment.
o
Risk
assessment for C3F8 and C4F10.
o
Readout
related safety:
o
**
Preliminary ** Readout
laser safety and procedures. **Preliminary**
o
Power
supply safety and procedures.
·
Procedures
o
**
Preliminary ** Readout
laser safety and procedures. **Preliminary**
o
Power
supply safety and procedures.
o
Robot.
o
What
to do if the dew point gets too high.
·
Infrastructure
o
Clean
Room (Procedures, plant).
o
Cold
room cooling (Neslab).
·
DCS
o
Barrel/environment
system.
o
Connections.
o
Power
supply control and monitoring.
·
Map
of pad repairs on B3 performed at RAL. ** Careful: the rows in this table
are shifted by one row: Subtract 1 from the number in the table to find the
row, in which the pads repaired can
be found. **
·
Box map
·
List of DCS sensors and their
connection
·
Description
of module locations with retroreflectors. ** Careful: this documents counts
rows from 0 to 31. Add 1 to the row number and you get the correct LMT row
number **
·
Results
of robot position measurements on B3 – Robot
position measurement data.
·
Results of
harness tests on B3 at Oxford. Open fields in this table have not been
tested.
·
Module
map.
·
List
of assembly features on B3
·
List of
electrical features on B3
·
Oxford
B3 sign-off check sheet.
Further documentation on cooling loop
numbering etc. can be found on Steve’s webpage.
·
Box
map.
·
List of DCS
sensors and their connection.
·
Module
map.
·
B4
Robot position measurement data.
·
List
of assembly features on B4.
·
List of
electrical features on B4.
·
Box
map.
·
List of DCS
sensors and their connection.
·
Module
map.
·
B5
Robot position measurement data.
·
List
of assembly features on B5.
·
List of
electrical features on B5.
·
Box
map.
·
List of DCS
sensors and their connection.
·
Harness
map with known faults.
·
Module
map.
·
B6
Oxford reception check-list.
·
B6
Robot position measurement data.
·
List
of assembly features on B6.
·
List of
electrical features on B6.
·
B6
final checkout list at Oxford.
Documents describing the
**Note: These documents are internal drafts and partly outdated. **
·
Power-on and
power-off procedures.
·
Electrical tests
during macro assembly.
Document describing the transport of
**Note:
These documents are internal drafts and partly outdated. **
·
ATLAS